Daktronics AF-3165-34-RGB - Manual (Page 22)

Electrical Installation 18
3.7 Signal Termination from Computer to Display
Reference Drawings:
System Riser Diagram, RS422................................... Drawing A-174135
System Riser Diagram, RS232................................... Drawing A-174341
System Riser Diagram, Modem.................................. Drawing A-174342
System Riser Diagram Fiber ...................................... Drawing A-174344
System Riser; QC Outdoor Radio, V1500................... Drawing A-177006
Signal Input, Venus 1500 ........................................... Drawing B-175387
Note: The AF-3165 is designed for quicker connection to other displays, and to either the temp sensor
or a radio. Connection of the control equipment to the first display can be done using a cable with a
quick connect or can be wired directly to the Signal Termination Panel in that display. The following
cables are provided with the displays:
1. Interconnect cable from Display 1 to Display 2, length 4 feet.
2. Temp sensor with Quick Connect cable, length 10 feet.
3. Client radio with Quick Connect cable, length 25 feet.
Figure 19: Signal Termination