Daktronics DF-12xx - Manual (Page 43)

Gas Price 4-9
Display Operation
The following LCD prompt is shown for either Manual or Automatic dimming
selections:
LCD Screen Action
INTENSITY XX
↓↑
ENTER TO SET
XX – Current intensity (1-16)
Max intensity – 16
(Default is 16)
Press the up or down arrow key < ↑↓> to
modify the current intensity of the display
Press <ENTER> to accept this intensity. If the
manual-dimming mode is selected, this will be
the new intensity for the display all the time.
However, if the automatic dimming mode is
selected, the display will dim between the dim
mode and the maximum intensity level you
have set.
Radio Settings
The DataMaster controller is most often connected to an external radio device. When
the DM-100 senses that an external device is connected, the following LCD prompt
is shown at startup:
This LCD display is shown for several seconds while the DM-100 attempts to
configure the connected device.
Once the device is found and initialized, the LCD shows which device is connected:
For more information on the radio controlled display refer to ED13894:
DataMaster Radio Installation Manual.
LCD Screen Action
SEARCHING FOR
CONNECTED DEVICE (None necessary)
LCD Screen Action
Radio found
& initialized This message appears on the LCD when a radio is
connected.