Daktronics DF-12xx - Manual (Page 41)

Gas Price 4-7
Display Operation
The modem will automatically disconnect from the display after a period of
inactivity, set by the Disconnect Time set function in the menu. When less than 5
seconds of modem connection remain, the LCD will count down the time remaining,
giving the user a chance to retain modem connection to the display.
The modem will disconnect from the display in 5 seconds. Press < CLEAR > to cancel
and remain connected to the display.
Display Sequence
Once connected to the display, press < DISPLAY SEQUENCE > to display the new
sequence on the display. This button will also allow for a preview of the new
sequence on the LCD.
Set Time
Use the Set Time menu to set the time on the display.
LCD Screen Action
SET TIME–12HR
HH:MM AM
↓
HH – Current hours value
MM – Current minutes value
AM – Current AM/PM setting (not shown when
24-hour time is selected)
Using the number keys, enter the Time in the
12-hour (or 24-hour) format. Press the down
arrow key <
↓> to modify the AM/PM setting.
Note: The flashing asterisk shows the current
data being edited.
To save changes, press the <ENTER> key
when finished editing.
Press the <CLEAR> key to cancel changes
After setting the time you will need to set the date. If the date is already correct,
enter through the date and press <
ENTER > to send the time to the display.
MODEM
DISCONNECT IN 05