Daktronics Fuelight FL-3000 and FL-4500 Series 36 and 48 Petroleum Price Display and Cash/Credit Display - Manual (Page 43)

Using the FLR3-1500 and FLD3-2000 Handheld Console 37
8.9 Dimming
Adjust the dimming either Automatically or Manually.
1. Press DIMMING on the keypad. The current setting is shown on the bottom line of the LCD.
Note: Displays ship from the factory in Automatic Dimming Mode.
d. Automatic Dimming uses a light sensor located in each display’s decimal to detect the level of
ambient light at the display location and dims the sign’s LEDs accordingly.
e. Manual Dimming keeps the sign’s LEDs at the same brightness level regardless of the level of
light detected at the display.
2. Refer to the following tables to set the dimming level:
Manual Dimming
8.10 Update the Display
1. After connecting to the display with the handheld controller, press UPDATE DISPLAY to send prices to
the display.
2. The DM-100 shows a response or an error code.
LCD Screen Action
DIMMING
AUTOMATIC ↓
DIMMING
MANUAL ↓
Press the Down Arrow key to toggle through dimming settings:
Automatic – The display automatically dims based on the light detected at
the display
Manual – The display dimming level is set manually. Once set, this value
remains regardless of the level of light detected at the display.
Blank Sign – Clears all content from display.
•
Press Enter for Yes
• Press Clear for No
• Note: When in Blank Mode, the digits on all of the displays will turn off
and only the decimal will be lit
To remove the displays from Blank Mode:
•
Press the Dimming key on the DM-100
• Press Enter for Yes
• Press Clear for No
BLANK THE
SIGN?
LCD Screen Action
XX – Current intensity (2-63)
Max Intensity – 63
Press ENTER to change the intensity.
When manual dimming mode is selected, this is the display’s new intensity.
DIMMING
MANUAL ↓
INTENSITY XX ↓↑
ENTER TO SET