Daktronics Fuelight FL-3000 and FL-4500 Series 36 and 48 Petroleum Price Display and Cash/Credit Display - Manual (Page 30)

24 Using the FLR3-100/400 Key Fob
7.3 Edit Prices on the Display
To edit the price on the display, press and hold any button for 5 seconds. When the display is in Edit mode,
the decimal LEDs blink.
On the key fob, each pair of buttons is numbered and corresponds to a price line on the display.
Increase the Price
To increase the price, press <+> for the corresponding line.
Decrease the Price
To decrease the price, press <-> for the corresponding line.
Turbo Mode
To rapidly increase or decrease a price, press and hold the button for the corresponding line.
Note: If no button is pressed for more than 10 seconds, the display exits the Edit mode. The prices are saved,
and the display returns to its normal state.
Note: Wait 3 minutes before shutting off power to the displays so price changes are saved.
7.4 Dimming
Fuelight displays ship from the factory in Automatic Dimming Mode.
Note: The FLR3-100/400 should always use Automatic Dimming Mode.
1. Press and hold the -1 and +4 buttons on the key fob to enter Configuration Mode.
2. Press the -1 or +1 buttons to switch from Automatic Dimming to Manual Dimming.
a. Set is shown on the display when in Manual Dimming Mode.
b. Aut is shown on the display when in Automatic Dimming Mode.
c. Use the -2 and +2 buttons when in Manual Dimming Mode to adjust the brightness level. Contact
the Daktronics help desk at 800-325-8766 for assistance modifying manual brightness levels.
3. Press and hold the -1 and +4 buttons on the key fob to exit Configuration Mode.