Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 77)

TD020850-0MG
77
5.1.5 Private Managed Objects
MIBs for Contemporary Controls — 1.3.6.1.4.1.17384
• Switch Family — 1.3.6.1.4.1.17384.1
• Switch Series — 1.3.6.1.4.1.17384.1.1
oid = “1.3.6.1.4.1.17384.1.1.1.0”
temperature: indicates the internal temperature of the switch in degrees Celsius.
Type: string
Access: read-only
5.1.5.1 Relay Group – 1.3.6.1.4.1.17384.1.1.2
oid = "1.3.6.1.4.1.17384.1.1.2.1.0"
switchFaultStatus: the fault status of this switch.
Type: integer
1 = fault has occurred
2 = no fault has occurred
Access: read-only
5.1.5.1.1 Fault Table – ‘faultTable’ 1.3.6.1.4.1.17384.1.1.2.2
oid = "1.3.6.1.4.1.17384.1.1.2.2.1.ifIndex"
portMonitoringFaultStatus: fault status for each port.
Type: integer
1 = fault has occurred
2 = no fault has occurred
Access: read-only
5.1.5.2 RapidRing Group – 1.3.6.1.4.1.17384.1.1.3
oid = “1.3.6.1.4.1.17384.1.1.3.1.0”
ringEnableStatus: the RapidRing is enabled or disabled
Type: integer
1 = RapidRing is enabled
2 = RapidRing is disabled
oid = “1.3.6.1.4.1.17384.1.1.3.2.0”
switchMode: the switch is a Master or a Slave
Type: integer
1 = Master
2 = Slave
oid = “1.3.6.1.4.1.17384.1.1.3.3.0”
ringID: the group number of the RapidRing
Type: integer
1 = group number 1
2 = group number 2
oid = “1.3.6.1.4.1.17384.1.1.3.4.0”
networkStatus: the network topology
Type: integer
1 = Ring Not Available (because RapidRing is not enabled)
2 = Ring Complete
3 = Ring Incomplete