Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 65)

TD020850-0MG
65
5.1.1.2 ‘Interfaces’ group 1.3.6.1.2.1.2
oid = "1.3.6.1.2.1.2.1.0"
ifNumber: the number of network interfaces (regardless of their current state) present
on this system.
Access: read-only
5.1.1.2.1 The Interfaces Table — ‘ifTable’ 1.3.6.1.2.1.2.2
oid = "1.3.6.1.2.1.2.2.1.1.ifIndex"
ifIndex: a unique value , greater than zero, for each interface.
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.2.ifIndex"
ifDescr: interface string contains information about the interface.
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.3.ifIndex"
ifType: interface type = 6 if Ethernet
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.4.ifIndex"
ifMtu: the size of the largest datagram that can be sent/received
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.5.ifIndex"
ifSpeed: interface speed = 100000000 for 100Base-TX
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.6.ifIndex"
ifPhysAddress: Ethernet (MAC) address (only used for designated management port
on a switch)
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.7.ifIndex"
ifAdminStatus: the desired state of the interface
1 = up (ready to pass packets)
2 = down
3 = testing
Access: read-write
oid = "1.3.6.1.2.1.2.2.1.8.ifIndex"
ifOperStatus: the current operational state of the interface
1 = up (ready to pass packets)
2 = down
3 = testing
4 = unknown
5 = dormant
Access: read-only