Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 63)

TD020850-0MG
63
4.6 Upload/Download Settings
The switch settings can be stored to a PC and retrieved from a PC.
To
upload the settings to the PC, select Upload/Download Settings from the
Managed Switch Main Menu — like the one for model EISX8 displayed in Figure 54. In
the next menu that appears, select Upload Settings to PC. Then, in HyperTerminal
select Transfer > Receive File. Enter the name of the file and select the Xmodem
protocol. Then press the Receive button.
NOTE: Settings uploaded to PC are read from the switch’s non-volatile memory. Thus, to upload
current settings, first store them to non-volatile memory (see Section 4.2) and then upload them.
To download a previously-uploaded settings file to the switch, select Upload/Download
Settings from the Managed Switch Main Menu. In the next menu select Download
Settings from PC. Then in HyperTerminal select Transfer > Send File. Enter the
filename and select the Xmodem protocol. Then press the Send button. When the
transfer is complete, recycle power on the switch to have the settings take effect.
Figure 54 — Main Menu