Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 71)

TD020850-0MG
71
oid = “1.3.6.1.2.1.11.20.0”
snmpOutTooBigs: The total number of SNMP PDUs which were generated by the
SNMP protocol switch and for which the value of the error-status field is ‘tooBig.'
Access: read-only
oid = “1.3.6.1.2.1.11.21.0”
snmpOutNoSuchNames: The total number of SNMP PDUs which were generated by
the SNMP protocol switch and for which the value of the error-status is ‘noSuchName'.
Access: read-only
oid = “1.3.6.1.2.1.11.22.0”
snmpOutBadValues: The total number of SNMP PDUs which were generated by the
SNMP protocol switch and for which the value of the error-status field is ‘badValue'.
Access: read-only
oid = “1.3.6.1.2.1.11.24.0”
snmpOutGenErrs: The total number of SNMP PDUs which were generated by the
SNMP protocol switch and for which the value of the error-status field is ‘genErr'.
Access: read-only
oid = “1.3.6.1.2.1.11.25.0”
snmpOutGetRequests: The total number of SNMP Get-Request PDUs which have
been generated by the SNMP protocol switch.
Access: read-only
oid = “1.3.6.1.2.1.11.26.0”
snmpOutGetNexts: The total number of SNMP Get-Next PDUs which have been
generated by the SNMP protocol switch.
Access: read-only
oid = “1.3.6.1.2.1.11.27.0”
snmpOutSetRequests: The total number of SNMP Set-Request PDUs which have
been generated by the SNMP protocol switch.
Access: read-only
oid = “1.3.6.1.2.1.11.28.0”
snmpOutGetResponses: The total number of SNMP Get-Response PDUs which have
been generated by the SNMP protocol switch.
Access: read-only
oid = “1.3.6.1.2.1.11.29.0”
snmpOutTraps: The total number of SNMP Trap PDUs which have been generated by
the SNMP protocol switch.
Access: read-only
oid = “1.3.6.1.2.1.11.30.0”
snmpEnableAuthenTraps: Indicates whether the SNMP agent process is permitted to
generate authentication-failure traps.
1 = enabled
2 = disabled
Access: read-write