Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 10)

TD020850-0MG
10
4.3 System Configuration
Each of the System Configuration menu selections of Figure 4 will activate additional
sub-menus from among the following list :
Configure IP Address (explained in Section 4.2.1.1)
Configure Ports (explained in Section 4.2.1.2)
Configure Port Trunking (explained in Section 4.2.1.3)
Configure Port Mirroring (explained in Section 4.2.1.4)
Configure 802.1Q VLAN (explained in Section 4.2.1.5)
Configure Filtering & Forwarding Table (explained in Section 4.2.1.6)
Configure QoS (explained in Section 4.2.1.7)
Configure Relay (explained in Section 4.2.1.8)
Configure Redundancy (explained in Section 4.2.1.9)
Configure Rate Control (explained in Section 4.2.1.10)
Configure Port Security (explained in Section 4.2.1.11)
Configure IGMP Snooping (explained in Section 4.2.1.12)
Figure 4 — System Configuration