Comtech EF Data Vipersat Load Utility v3.5.x - Manual (Page 12)

How to Use This Manual
1-2 VLoad User Guide
Chapter 3 — Using VLoad in Vipersat Mode
Describes using VLoad for acting on the Application and Base Modem firm-
ware as well as the Configuration parameter file for selected VMS controlled
modems.
Chapter 4 — Using VLoad in Digicast Mode
Describes using VLoad for updating the firmware and tuner and PID settings, as
well as setting transmission parameters for selected Digicast receivers.
Appendix A — Glossary
A glossary of terms that pertain to Vipersat satellite network technology.
Conventions and References
The following conventions are utilized in this manual to assist the reader:
Note: Provides important information relevant to the accompanying
text.
Tip: Provides complementary information that facilitates the
associated actions or instructions.
Caution: Provides explanatory text that notifies the reader of
possible consequences of an action.
Warning: Provides precautionary text that describes a potentially
hazardous situation. Failure to take or avoid a specified
action may result in damage to equipment.
The following documents are referenced in this manual, and provide supple-
mentary information for the reader:
• Vipersat CDM-570/570L User Guide (Part Number MN/22125)
• Vipersat CDD-56X Series User Guide (Part Number MN/22137)
NOTE