Comtech EF Data CDM-550T - Manual (Page 73)

CDM-550T Satellite Modem Revision 3
Front Panel Operation MN/CDM550T.IOM
If, however, the selected location does not contain valid data, the following screen will be
displayed:
WARNING! LOC 10 CONTAINS
NO DATA! (ENTER)
Pressing ENTER or CLEAR will take the user back to the previous menu.
6.2.8 SELECT: UTIL (Utility)
Select SET-RTC, DISPLAY, MAN-1:1, RECENTER-BUF, or ID, using the [
←] [→] arrow
keys, then press ENTER.
This sub-menu permits the user to select from a number of different utility functions, which are
described below:
UTILITY: SET-RTC DISPLAY
MAN-1:1 RECENTER-BUF ID
6.2.8.1.1 (UTIL:) SET-RTC (Set real-time clock)
Edit the time and date settings of the real-time clock. This is accomplished by selecting the digit
to be edited, using the [
←] [→] arrow keys. The value of the digit is then changed using the [↑]
[
↓] arrow keys. Note that in accordance with international convention, the date is shown in DAY-
MONTH-YEAR format. The user should then press ENTER.
EDIT REAL TIME CLOCK:
12:00:00 24/04/98 (ENT)
6.2.8.2 (UTIL:) DISPLAY (Display brightness)
Edit the display brightness, using the [
↑] [↓] arrow keys. The user should then press ENTER.
EDIT DISPLAY BRIGHTNESS:
100% (PRESS ENTER)
6–37