Odu:) enable ( config ( transmitter (frequency, Odu:) enable ( config ( transmitter ( output, Odu:) enable ( config ( transmitter ( hpa – Comtech EF Data CDM-550T User Manual
Page 156
CDM-550T Satellite Modem
Revision 3
KST-2000A FSK Remote Operation
MN/CDM550T.IOM
(ODU:) ENABLE
Æ CONFIG Æ TRANSMITTER ÆFREQUENCY
EDIT ODU TX FREQUENCY:
14500.0 MHz (PRESS ENT)
Edit the transmit frequency by selecting the digit to be edited, using the [
←] [→] keys.
The value of the digit is then changed using the [
↑] [↓] keys. The user may then press
The frequency limits of the KST-2000A are known and the frequency values are
constrained accordingly.
(ODU:)
ENABLE
Æ CONFIG Æ TRANSMITTER Æ ATTEN (Attenuation)
EDIT ODU TX ATTENUATION:
15.00 dB (PRESS ENTER)
Edit the transmit attenuation by selecting the digit to be edited, using the [
←] [→] keys.
The value of the digit is then changed using the [
↑] [↓] keys. The user then presses
(ODU:)
ENABLE
Æ CONFIG Æ TRANSMITTER Æ OUTPUT
SELECT KST TX OUTPUT:
OFF ON WARM (ENTER)
Select ON, OFF, or WARM using the [
←] [→] keys, then press
• WARM is OFF, if COLD.
• WARM is ON, if warm and NO FAULTS
• FAULTS present, stays WARM and OFF indefinitely
(ODU:)
ENABLE
Æ CONFIG Æ TRANSMITTER Æ HPA
CONFIG HPA: STATE
FAULT-LOGIC (ENTER)
D–4