Comtech EF Data CDM-550T - Manual (Page 71)

CDM-550T Satellite Modem Revision 3
Front Panel Operation MN/CDM550T.IOM
6.2.6.4 (MONITOR) AUPC
If AUPC is selected, and the modem is in Framed mode, the following sub-menu is displayed:
The top line displays the value of Eb/No of the demodulator at the distant end of the satellite link.
The Eb/No will display UNLOCK if the remote demod is unlocked. The bottom line shows how
much the AUPC system has increased the output power. If AUPC is not enabled, the value of TX
POWER INCREASE will show as 0.0 dB.
FRAMING NOT ENABLED!
(PRESS ENTER)
AUPC: REMOTE EbNo=14.0dB
TX POWER INCREASE=2.2dB
6.2.7 SELECT: STORE/LD (Store/Load)
Select STORE or LOAD using the LEFT/RIGHT arrow keys, then press ENTER.
These sub-menus permit the user to store or load up to 10 different modem configurations in the
non-volatile memory of the modem
Selecting STORE will display the following screen:
STORE/LOAD CONFIG:
STORE LOAD (PRESS ENTER)
6.2.7.1 (STORE/LD) STORE
Select the location to store the current configuration to, using the [
↑] [↓] arrow keys, then press
ENTER. Locations 1 through 10 are available.
STORE CONFIGURATION TO
LOCATION: 10 (ENTER)
6–35