A.3 telnet or terminal interface – Comtech EF Data CMR-5970 Manual User Manual
Page 69
Digicast Media Router S2 Receiver CMR-5970 (MR-S2) & CMR-5990 (MR-S2-ASI)
Revision A
Software Upgrade
MN/MRS2ASIDC.IOM
A.3
Telnet or Terminal Interface
Access the Admin Menu (Figure A-2):
a) Select
(D)
for
Download Image
.
b) At the “Image type” prompt, enter
1
for
Application
or
2
for
FPGA.
c) Enter the TFTP IP server address. Once the TFTP IP server address is
entered, the software update will begin to download.
Do
NOT power the unit down during the upgrade process.
IMPORTANT
d) When the update is complete, the message “
Press any key to continue
”
will be displayed (Figure A-3).
e)
After the unit has been upgraded, reset the unit by selecting
(R)
for Reset and
‘
Y’
to confirm the reset.
Figure A-2. TFTP Download (via Terminal)
A–3