8 tuner mpeg ts route configuration – Comtech EF Data CMR-5970 Manual User Manual
Page 36

Digicast Media Router S2 Receiver CMR-5970 (MR-S2) & CMR-5990 (MR-S2-ASI)
Revision A
Device Management via User Interfaces
MN/MRS2ASIDC.IOM
4.2.8
Tuner MPEG TS Route Configuration
a) Full page and dialog box with ASI Input Port selected
b)
Page headers and dialog box with TUNER Input Port selected
Figure 4-10. Tuner MPEG TS Route Configuration page
From the pull down, the user must select for which input interface the PIDs will be
configured for MPE/IP. There is no pull down for the MR-S2; for the MR-S2-ASI, the
user can select which interface (Tuner or ASI) to configure.
4-10
This manual is related to the following products: