Comtech EF Data CMR-5970 Manual - Manual (Page 63)

Digicast Media Router S2 Receiver CMR-5970 (MR-S2) & CMR-5990 (MR-S2-ASI) Revision A
Device Management via User Interfaces MN/MRS2ASIDC.IOM
4.4 Telnet Interface
Telnet provides a textual interface over a LAN. Most PCs have the capability
Telnet. To use Telnet on a Micros to use
oft Windows
®
product, click , then .
The Run dialog box is shown in Figure 4-50. In the Open: text window, enter “telnet
xxx.xxx.xxx.xxx,” where xxx.xxx.xxx.xxx is the IP address of the MR-S2. If the port
number has been modified from the
via the Terminal Interface, then the port standard 23
number must be appended with a colon to the IP address.
Figure 4-50. Starting Telnet Session
The user will be prompted to enter the user name and password to gain access to the
telnet interface.
nce the m y as
hown F
Figure 4-51. Main Menu via Telnet
O enu is started, press and the MR-S2 Main Menu will displa
igure 4-51: s in
OTE
fault username is “comtech” and the default password is
“comtech”, both of which are case sensitive.
The de
N
4-37