Comtech EF Data CMR-5970 Manual - Manual (Page 21)

Chapter 2. INSTALLATION &
INITIAL CONFIGURATION
2.1 Major Assembly
The CEFD MR-S2 and MR-S2-ASI are each available in a standalone configuration.
Table 2-1 lists the components provided with a standard configuration. In the event any
listed item is missing, please contact Comtech EF Data Customer Support.
Table 2-1. Digicast Media Router S2 Receiver – Standalone Configuration
Quantity Description
1 CMR-5970 [MR-S2] or CMR-5990 [MR-S2-ASI]
1 SPU30-102 Power Supply
1 IEC Power Cable
1 CA-TERMINAL Terminal Cable
1 CD (includes this manual and a Quick Start reference)
1 Quick Start sheet
2.2 Unpacking
The shipping container and packing materials should be retained for possible reshipment.
Perform a receiving inspection as follows:
• Inspect the shipping container for damage. If there is damage to the shipping
container, notify the carrier .
• Check
to determine that all parts, materials and documentation have been shipped
with the router.
• Inspect
the router for possible physical damage.
• Test
the router for proper operation.
2-1