Comtech EF Data CMR-5970 Manual - Manual (Page 65)

Digicast Media Router S2 Receiver CMR-5970 (MR-S2) & CMR-5990 (MR-S2-ASI) Revision A
Device Management via User Interfaces MN/MRS2ASIDC.IOM
4.6 Simpl Netwo e rk Management Protocol (SNMP) (Future)
Simple et ) has not been enabled on this product and
is planned as a future release. However, when enabled, SNMP allows an SNMP Manager
such as OpenView or Castle Rock to be used to remotely manage the MR-S2 in an
such
ackets sent or received on an interface, etc. MIB II is designed for
As a security
recaution, passwords cannot be remotely queried over SNMP.
or SNMP the
MR-S2 ill need to be established using third-party VPN client/server access.
N work Management Protocol (SNMP
automated fashion.
The MR-S2 supports SNMP versions 1 and 2 (SNMPv1 and SNMPv2). Two types of
Management Information Bases (MIBs) are supported: MIB II and private MIB.
MIB II is the default MIB that is used to gather generic information about the unit,
as system ‘up’ time, p
only read access, not write access. To read and write configuration parameters over
SNMP requires a private MIB. The private MIB allows parameters to be set on the
Web, Terminal, or Telnet interfaces.
The elements Object Identifiers (OIDs) of the MIB will be listed in the appendix of a
revised version of this manual. CEFD has been assigned an SNMP designator by the
IEEE, which will be found in all elements of the MR-S2’s MIB.
igurable community strings for added security. The MR-S2 supports conf
p
F access from a remote network via the public Internet, a VPN connection to
w
The default community string for the public elements is “ public ” and the private
community string is “ private .”
IMPORTANT
than 100% transferred, but this is a normal condition. Be patient and
allow the transfer to take place.
Und take several
minutes. Th how greater
er heavy traffic conditions, the TFTP transfer may
e transfer process reported by Solarwinds may s
NOTE
The assigned designator for CEFD (enterprise OID) is 1.3.6.4.1.18723.
4-39