Comtech EF Data CMR-5970 Manual - Manual (Page 29)

Digicast Media Router S2 Receiver CMR-5970 (MR-S2) & CMR-5990 (MR-S2-ASI) Revision A
Device Management via User Interfaces MN/MRS2ASIDC.IOM
Beginning with the Administrative Configuration Menu page (Figure 4-3),
all pages containing configurable parameters feature a login dialog box
at the bottom of the page. Changes to the MR-S2 configuration will not
be accepted without a valid user name and password.
IMPORTANT
The MR-S2 Administrative Configuration page contains the following configurable
parameters:
User Name
The MR-S2’s User Name is user configurable and is used for connecting to the
unit via IP management services.
The default user name is
comtech .
Password
The MR-S2’s Password is user configurable and is used for authenticating a user
when connecting via IP management services.
The default password is
comtech . The password is case sensitive and must be
entered carefully.
When the password is changed, the user will be prompted to enter the password
twice to verify it is correct.
System Contact
Contact information of the system administrator for support.
System Location
The physical location where the unit has been installed.
Enable Telnet
Enables Telnet application on the MR-S2.
SNMP IP Address
Defines the SNMP server that can connect to the unit.
Login Required
A user name and password are required to make any changes to the MR-S2
configuration.
Update Firmware
Allows software/firmware changes to be made. User name and password is
required for security.
4-3