Comtech EF Data CMR-5970 Manual - Manual (Page 38)

Digicast Media Router S2 Receiver CMR-5970 (MR-S2) & CMR-5990 (MR-S2-ASI) Revision A
Device Management via User Interfaces MN/MRS2ASIDC.IOM
4.2.9 Service Filter Route Configuration (MR-S2-ASI only)
Figure 4-11. Service Filter Route Configuration page (MR-S2-ASI only)
This menu allows the MR-S2-ASI (only) to filter incoming transport streams.
Enable
Enables or disables a program.
Name
Name configured for a program.
PID In
The hexadecimal value of an input PID contained within a transport stream to the
MR-S2-ASI.
PID Out
The hexadecimal value of an output PID contained within a transport stream
from the MR-S2-ASI. This feature allows the operator to set up and remap
incoming and outgoing PID values for a transport stream.
PMT PID In
The hexadecimal value of the input PMT PID to the MR-S2-ASI.
PID Out
The hexadecimal value of the output PMT PID from the MR-S2-ASI.
4-12