Comtech EF Data CRS-150 - Manual (Page 48)

CRS-150 1:1 Redundancy Switch Revision 2
Cables and Connections MN/CRS150.IOM
4–4
4.2.3 Modem-to-Switch IF Interface Connection
EXAMPLE:
The Tx IF from ‘ Modem A’ connects to the ‘Tx IF A’ port on the CRS-150;
similarly, the Tx IF from ‘Modem B’ connects to the ‘Tx IF B’ port on the CRS-150.
The same logic applies for the Rx IF connections. It is important to note that failure to
observe this requirement will result in system malfunction.
QTY Part No. Description
4 PL/0946-1 RoHS-Compliant Cable – IF (Tx/Rx), 50Ω Type ‘BNC’ (4’)
Figure 4-2. Modem-to-Switch IF Connection