Comtech EF Data DMDVR20 LBST Rev 1.1 - Manual (Page 92)

DMDVR20 LBST Satellite Modem Appendix B
TM136 – Rev. 1.1 B-1
Front Panel Upgrade Procedure
B
B.0 Introduction
The Satellite Modem offers the ability to perform field upgrades of the modem’s feature set
quickly and easily from the front panel. Purchased upgrades will become part of the modems
permanent configuration. Demonstration upgrades will enable the optional features for a 30-day
evaluation period.
B.1 Required Equipment
The Satellite Modem is the only equipment required for this procedure.
B.2 Upgrade Procedure
The following paragraphs describe the procedure for permanently updating the feature set of the
Satellite Modem
1.
The following steps allow users to quickly determine from the front panel whether or not
the desired feature(s) are supported by the hardware currently installed in the modem.
a. From the modem’s Main Menu, scroll right to the SYSTEM Menu.
b. Scroll down.
c. Scroll right to the HW/FW CONFIG Menu.
d. Scroll down
e. Scroll right to the FEATURES Menu.
f. Scroll down.
g. Scroll right to the UPGRADE LIST Menu.
h. Scroll down.
i. Scroll right through the available list of options.
The top line identifies the options and the second line identifies the following options
status:
INSTALLED indicates that the option is already available as part of the modems feature
set.
HW & KEY REQ indicates that additional hardware is required to support the option.
Contact your Radyne sales representative for more information regarding the required
hardware upgrade.
KEY CODE REQ indicates that the desired option is available as a front panel upgrade.