beautypg.com

4 front panel led indicators – Comtech EF Data DMDVR20 LBST Rev 1.1 User Manual

Page 40

background image

DMDVR20 LBST Satellite Modem

User Interfaces

TM136 – Rev. 1.1

4-3

Cursor 1

Position

Left

Cursor 1

Position

Right

IP Address Changes Digit Increments

Digit Value

Decrements

Digit Value

Moves

Cursor 1

Position

Left

Moves

Cursor 1

Position

Right

N/A N/A

Text Strings

Changes

Character

Increments

Character

Value

Decrements

Character

Value

Moves

Cursor 1

Position

Left

Moves

Cursor 1

Position

Right

Clears to

Left of

Cursor

Inclusive

Clears to

Right of

Cursor

Inclusive

4.1.4 Front Panel LED Indicators


Twelve LEDs on the Front Panel (Refer to Table 4-3) indicate the status of operation. The LED
colors maintain a consistent meaning. Green signifies that the indication is appropriate for normal
operation, Yellow means that there is a condition not proper for normal operation, and Red
indicates a fault condition that will result in lost communications.

Table 4-3.

LED

Color

Function

Modem LED Indicators

Power

Green

Indicates that the unit is turned on.

Fault

Red

Indicates a hardware fault for the unit.

Event

Yellow

Indicates that a condition or event has occurred that the
modem has stored in memory. The events may be viewed
from the Front Panel or in the Terminal Mode.

Remote

Green

Indicates that the unit is in the process of updating firmware
with FTP or flashing indicates some features are demo
enabled.

Modulator LED Indicators

Transmit On

Green

Indicates that the transmitter is on.

Major Alarm

Red

Indicates that the Transmit Direction has failed, losing traffic.

Minor Alarm

Yellow

Indicates that a Transmit Warning Condition exists.

Test Mode

Yellow

Indicates that the transmitter is involved in a current Test
Mode activity.

Demodulator LED Indicators

Signal Lock

Green

Indicates that the receiver locked to an incoming carrier and
data, including FEC Sync.

Major Alarm

Red

Indicates that the Receive Direction has failed, losing traffic.

Minor Alarm

Yellow

Indicates that a Receive Warning Condition exists.

Test Mode

Yellow

Indicates that the receiver is involved in a current Test Mode
activity.

This manual is related to the following products: