Comtech EF Data DMDVR20 LBST Rev 1.1 - Manual (Page 60)

DMDVR20 LBST Satellite Modem User Interfaces
TM136 – Rev. 1.1 4-23
BACKWARD ALARM {Pass/Fail}
Backward alarms are only available on the Modulator.
IDR1 SAT CNTRL {STNDRD, ERC ON, ERC OFF} (TX=PASS)
IDR2 SAT CNTRL {STNDRD, ERC ON, ERC OFF} (TX=PASS)
IDR3 SAT CNTRL {STNDRD, ERC ON, ERC OFF} (TX=PASS)
IDR4 SAT CNTRL {STNDRD, ERC ON, ERC OFF} (TX=PASS)
IBS SAT CNTRL {STNDRD, ERC ON, ERC OFF} (TX=PASS)
T1E1 TERR CNTRL {STNDRD, ERC ON} (TX=PASS)
IBS TX PROMPT {STNDRD, ERC ON} (TX=PASS)
IBS TX SERVICE {STNDRD, ERC ON} (TX=PASS)
4.3.7 System Menu Options and Parameters
DATE (MM/DD/YY)
Allows the user to enter the current date.
TIME {HH:MM:SS}
Allows the user to enter the current time.
CONFIG COPY
{Current, CFG1……CFG10}
Allows user to copy, save and recall modem
configurations.
FRONT PANEL (menu)
BKLT LEVEL {OFF, LOW, MED, HIGH}
Allows the user to enter the backlight intensity level.
BKLT TIMEOUT {00 - 99}
Allows the user to enter the length of time (in seconds)
of keyboard inactivity before the backlight shuts off. 00
= no timeout.
KEY CLICK {ON, OFF}
Allows the user to enable or disable the audible beep
each time a key is pressed. Illegal entries will still cause
a beep to be heard.
LED
TEST {ENTER}
Allows user to test all front panel LEDs.
REMOTE CONTROL
{TERMINAL, COMPUTER}
Allows the user to select between terminal RS-232
control and remote port M&C RS-232/-485 control.