Code Blue IP1500 VOIP SPEAKERPHONE - Manual (Page 61)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-137-E page 61 of 66
IP1500 and IP2500 Series
Administrator Guide
The speakerphone can be configured for multiple uses. The main function is to provide 2-way voice
communications. Pressing the red button will activate the configured script programmed for button
#1.
Button #1 activation overrides any other action the speakerphone is performing at the time of the
button press. For example if the speakerphone:
1. Is being programmed at the time
2. Was in a monitoring call
3. Was in the middle of a diagnostic test
4. Is currently in an information (button #2) call.
Button #2, INFO or CALL buttons are typically utilized for placing informational calls. Any action
other than Button #1 activation is consider Non-Priority calling and commonly utilized for director
service, student/employee escort requests, gate entry, guest services and similar requests.
The speakerphone’s Auxiliary Output is typically utilized for activating Code Blue’s LED Beacon/
Strobe, and can be used as a normally open (N.O.) dry contact closure (see spec for relay ratings)
used, for example, to activate centralized building/security management equipment.
Incoming calls: The speakerphone auto-answers an incoming call. (Based on the settings config-
ured under General Settings in General Configuration > Incoming Calls > Answer in Immedi-
ately or after a number of rings.)
13 Using the IP1500 and IP2500 Series Speakerphones