Code Blue IP1500 VOIP SPEAKERPHONE - Manual (Page 45)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-137-E page 45 of 66
IP1500 and IP2500 Series
Administrator Guide
7 CLI (Command Line Interface)
The speakerphone has extensive commands that can be used by telnetting into the device.
You can use windows telnet or download a common free telnet client, “putty”.
Telnet to the IP Address of the speakerphone: use port 23 if unsure.
Login is the same as through the Web GUI.
admin
admin
You can type “help” to see a list of available commands.
The most commonly used:
Format c: codeblue – Using this command, you format the phone and return it to factory
default. This command must then be followed up with a reboot.
Reboot – Make the phone reboot.
Ping IP Address or Domain Name – Ping the IP PBX to see if the phone can reach its
registrar.
Button 1 – Select button 1-4 and initiate a button push remotely. This is very handy for re-
mote testing. Button 1 is the red button. Button 2 is the black button if equipped.