Code Blue IP1500 VOIP SPEAKERPHONE - Manual (Page 52)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-137-E page 52 of 66
IP1500 and IP2500 Series
Administrator Guide
1. Under Line 1, for Display (Internal Caller ID), enter a descriptive name for Caller ID pur
poses.
2. If you wish to return a busy signal for silent monitoring if the IP1500/2500/5000 is in use,
disable Call
Waiting: under Multiple Call/Call Waiting Settings, For both Maximum Number of Calls and
Busy Trigger, enter 1.
3. Click Save.
Configuring Phones and Directory Numbers for Secondary Accounts
If you are going to use the IP1500/2500/5000’s secondary account functionality, repeat the above
process with a local-use-only MAC address as outlined in Configuring End Users for Secondary Ac-
counts, and specify a distinct directory number.
IP5000 CONFIGURATION
Refer to the IP1500/2500/5000 Administration AND User Guide located on our website
Clear Existing Configuration
If necessary, clear the IP1500/2500/5000’s existing configuration. This will reset it to DHCP, so
make sure you have the capability to find the device’s IP address again if you do this. For each unit:
1. Open a Telnet client and connect to the IP1500/2500/5000.
2. Log in using the username admin and the default password admin.
3. Type format c: codeblue and press Enter.
4. Type reboot and press Enter.
Configure Account(s)
1. Log in to the IP1500/2500/5000 via its web interface. The default username and password
are admin and admin.
2. Select Account 1.
3. For VoIP Protocol, select SIP & RTP.
4. Under SIP Configuration, for Username/Number, enter the directory number you assigned
earlier.
5. For Display Name, enter caller ID text.
6. For Domain, enter the hostname or IP address of the CUCM node you wish to register this
account to.