Code Blue IP1500 VOIP SPEAKERPHONE - Manual (Page 46)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-137-E page 46 of 66
IP1500 and IP2500 Series
Administrator Guide
8 In-Call Commands
The speakerphone provides enhanced functionality through the utilization of In Call Commands.
These commands are DTMF or phone keypad entries made by the Called party. Below is a list and
explanation of each command.
In-Call Command Function Description
1 Play Location Message Plays the Location Recordings selected in
General Settings
3 Deactivate Call Timer Deactivates the Maximum call duration timer
setting in the operational script currently
running
4 Activate/Deactivate Auxiliary 1 Toggle Auxiliary 1 state; activate or
deactivate
6 Mic Volume Up Increase the microphone gain; used to
increase the Called party volume
7 Mic Volume Down Decrease the microphone gain; used to
decrease the Called party volume
8 Speaker Volume Up Increase the speaker volume; used to
increase the Calling party volume
9 Speaker Volume Down Decrease the speaker volume; used to
decrease the Calling party volume
Note: Some VoIP codecs do not fully support DTMF Tone signally and may not function as intended.