Code Blue IP1500 VOIP SPEAKERPHONE - Manual (Page 22)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-137-E page 22 of 66
IP1500 and IP2500 Series
Administrator Guide
VLAN Configuration
The speakerphone is capable of performing IEEE 802.1Q frame tagging and user priority settings.
1. Click on the Network menu item under Network Setup (see far left-hand column).
2. Then click on the VLAN Enabled check box in the VLAN section and select your desired
VLAN ID and User Priority.
3. Once you have entered your settings, click on Save Changes.
Note that if your PC cannot access the new VLAN, you will have to correct this problem before
continuing configuration, as you will lose access to the speakerphone. If you wish to disable VLAN
support and cannot reach the speakerphone on its configured VLAN, factory-reset the unit to clear
network configuration.