Cadac CDC four - Manual (Page 81)

Revision 1 2012-13 CDC FOUR
81
Ensure that an Ethernet cable with Internet connection is plugged into the CDC
FOUR’s rear panel RJ45 socket.
Reboot by power-cycling the mixer, then return to the Maintenance page and
select Net Update.
The CDC FOUR will automatically download and install the current version of
software.
NOTE: The CDC FOUR will always download and install the latest version of
software irrespective of whether it is already installed in the console or not.
Upon completion, the CDC FOUR will display the following message, “Software
successfully updated to the latest version!”
To re-boot the CDC FOUR it is necessary to power-cycle the console twice. After
the first power-cycle wait until all the LEDs on the console are lit, then perform the
second power-cycle. The console will then boot with the latest version of software
installed.
To check which version of software the console is running, press the System
button and then the System Settings softkey (Sys.Settings).
If console scenes were backed-up prior to updating the software then restore
these into the CDC FOUR by using the Scene Restore function above.
NOTE: It is not possible to return to the CDC FOUR’s normal operating system
from the Maintenance page. To exit this page, please re-boot the console by
power-cycling.