Cadac CDC four - Manual (Page 35)

Revision 1 2012-13 CDC FOUR
35
Shelf – switches the LF section of the equaliser between Bell and Shelving
modes. In Shelving mode, the EQ section acts as a “bass” control, and has a
fixed slope of 6 dB/octave. Default is Bell.
EQ IN – switches the entire 4-band EQ section into circuit. Default is EQ Out; in
this state, the entire EQ section of the CHN page is “dark”.
Aux Sends:
The CDC FOUR’s eight auxiliary sends are identical in operation. For brevity,
only Aux 1 is described:
AUX 1 – level control from the channel to Aux Buss 1. Range is – ∞ (i.e., off); then
-75 dB to 0 dB. Default is Off.
ON – unmutes the feed to Aux Buss 1. Default is Off.
PRE – default source for Aux. Sends is post-fade, but can be changed to pre-fade
with the PRE button. Both pre- and post-fade sends are post-Channel Mute.
The status of all eight Aux. sends for blocks of 16 input channels may be viewed
on the screen ROUTE page. See page 51.
+ -
HI LO
W N
+ -
HI LO
W N
+ -
HI LO
W N
+ -
HI LO
W N
FREQ
Q
FREQ
FREQ
FREQ
Q
Q
Q
HMF
HF
LMF
LF
dB
IN
EQ
IN
IN
IN
IN
dB
dB
dB
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUX 7
AUX 8
ON
PRE
ON
PRE
ON
PRE
ON
PRE
ON
PRE
ON
PRE
ON
PRE
ON
PRE
∞ 0
0
0
0
0
0
0
0
∞
∞
∞
∞
∞
∞
∞