Cadac CDC four - Manual (Page 53)

Revision 1 2012-13 CDC FOUR
53
Metering
The METERS button opens the Metering page. This allows the signal levels in
all the CDC FOUR’s internal channels to be viewed simultaneously. The meters
displayed on the Metering page are “virtual copies” of the meters on the Channel
Overview pages.
The screen is divided into three, with input meters at the top and centre and
output meters at the bottom. Channels 1 to 16 are displayed at the top, the eight
stereo channels as dual meters in the centre, and meters for the four Groups,
eight Aux sends, two FX sends and the stereo master at the bottom. The FX
sends and stereo master have dual meters.
The middle and lower areas are constant, but the upper area will change with
selection of the higher-numbered input channel layers (17-32 and 33-48), if the
CDC RACK stagebox is in use.
The metering source for the mono and stereo channels may be switched between
pre- or post-fade by Softkeys 1 and 2 respectively. Two further softkeys select
the output meters (the bottom meter panel) to switch pre- or post-fade in a similar
manner.