Cadac LIVE1 - Manual (Page 12)

12
Revision L1.1 2011-12 Live1
DC connections
The rear panels of both the Live1 and the PS1 are fi tted with a 10-pin connector.
A screened interconnecting cable is supplied with the mixer.
If it is necessary for the PS1 to be installed at a greater distance from the Live1
than the length of the supplied cable allows, users may manufacture their own
interconnecting cable, ensuring that all cores are wired pin-to-pin. The DC
connector pinout used on the Live1 is as follows:
Pin Supply Pin Supply
1 +12 V 6 0 V
2 +12 V 7 +15 V
3 +15 V 8 -15 V
4 -15 V 9 screen
5 0 V 10 screen
The maximum permissible cable length to ensure reliable performance will
depend on i) the Live1 model and ii) the type of cable. Users wishing to
manufacture longer DC PSU cables are advised to contact Cadac’s Technical
Department for recommendations.