Cadac LIVE1 - Manual (Page 10)

10
Revision L1.1 2011-12 Live1
Mechanical dimensions
NOTE: when installing the Live1 in a permanent or semi-permanent situation,
an additional allowance must be made at the rear of the console for connectors
and cables.
Fitting the rack mounting kit (Model 1642 only)
The Live1 1642 is supplied with a pair of rack mounting brackets which permit
the mixer to be installed in a standard 19” equipment rack.
To install the brackets, remove the fi ve upper screws (those closest to the mixer
control surface) which secure each metal end cheek to the chassis. Fit the rack
mounting brackets over the end cheeks and refi t the fi ve screws. Note that the
brackets are handed (i.e., one is designed to fi t on the left hand side of the
console and the other to the right). This is indicated by an ‘L’ or ‘R’ label affi xed
to the bracket.
Height
300 mm
Depth 660 mm
Height
85 mm
(2RU)
Depth
185 mm
Width
560 mm
Width
720 mm
Width
900 mm
Width 483 mm
PSU