Bronkhorst DeviceNet slave interface - Manual (Page 30)

BRONKHORST ®
Page 30 DeviceNet interface 9.17.026
6 ADD SLAVE TO DEVICENET
In next paragraphs some example screens will be showed of a master configuration tool to explain how
to install a Bronkhorst meter/controller DeviceNet slave. The tool used for this purposes is Sycon
V2.6.2. from Hilscher G.m.b.H. For other master configuration software tools the working will be
almost the same, because DeviceNet is a standardised field bus system. Read the user manual carefully
for correct operation of other programs than Sycon.
In your master configuration software select: [Insert][Device].
Select [Bronkhorst meter/controller] and evt. press [Add].
AN EXAMPLE OF THIS PROCEDURE CAN BE FOUND BELOW: