Bronkhorst LIQUI-FLOW mini (from 01-07-2013) - Manual (Page 27)

LIQUI-FLOW™ mini © 2013 Bronkhorst High-Tech BV
Bronkhorst High-Tech BV
27
Fieldbus 2 address
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW 0...255 309 124/10 0xFC50/64593
Set the node address at any of the allowed values listed in the table in Section 3.5.3, e.g. '3'.
Fieldbus 2 baud rate
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW 0...1E+10 310 124/9 0xFC48...0xFC49/64585...64586
Set the baud rate at any of the allowed values listed in table in section Section 3.5.3, e.g. '19200'.
Fieldbus 2 medium
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW 0...1 311 124/11 0xFC58/64601
Select the communication medium. Parameter value 0 = RS232, 1 = RS485
Fieldbus 2 parity
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW 0...2 336 124/12 0xFC60/64609
Set the parity for Modbus communication. Parameter value 0 = None, 1 = Odd, 2 = Even.