Bolide BN1008 - iCube - Manual (Page 51)

47
PRODUCT USER MANUAL BN1008 - iCube
Open / Close: Open / close the real-time preview of all device channels.
Alarm On/Off: Enable this function to get the alarm information from device and give
prompts actively. Click Alarm Off to close this function.
All to master / sub stream: Set all channels as master stream or sub stream.
Start Talkback: Audio talkback switch. Click this button to perform the talkback
between PC and device; the device icon is changed to after enable audio
talkback, and “Start Talkback” is changed to “Stop Talkback”; click "Stop Talkback"
to stop talkback.
4.2.5 PTZ Control
When the device is connected to PTZ or communication device, user can control
PTZ via PTZ control panel.
1) PTZ
Refer to Fig 4-5.
User can control the dome rotates up, up left, left, left down, down, right down, right,
up right and stop rotating; drag the slider to adjust the rotate speed; zoom, focus and iris
are adjustable; select the serial number of preset point, which allows up to 128 presets to
be included, then click “Save” button to save the preset position.
Click “Start Saving Pattern” button to record the track of PTZ movements, click this
button again to stop recording; click “Start Pattern” button to play recorded pattern, click
this button again to stop playing; click “Start Auto Scanning” button to start auto scan, click
this button again to stop scan.