Setting hdd status, Setting hdd to read-only – Bolide SVR8000s User Manual
Page 79
SVR-8000S User’s Manual
79
Figure 2. HDD Group Settings Menu
5.
Select OK to save and exit menu.
Note:
By default, all HDDs belong to group 1.
Setting HDD Status
You may change the behavior of your HDD by changing its status. The status of a HDD can be set to redundancy,
read-only or read/write (R/W).
Setting HDD to Read-Only
A HDD can be set to read-only to avoid important recorded files from being overwritten when the HDD becomes full.
To set a HDD to read-only:
1.
Enter the HDD Management menu by clicking Menu > HDD.
2.
Select HDD to protect.
3.
Select the Property button to enter the Property Settings menu, as shown in Figure 3.
Figure 3. HDD Property Settings Menu