Bolide SVR8000s - Manual (Page 65)

SVR-8000S User’s Manual
65
5. Click OK to save and exit menu.
Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can do so in the Network Settings
menu. The default server port is 8000 while the default HTTP port is 80.
To change the default ports:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4. Enter new Server Port and HTTP Port, as shown in Figure 11.
Figure 11. Host/Others Menu
Note:
The Server Port has a port range of 2000-65535 and is used for remote client software access. The HTTP port
is used for remote internet browser access.