Dimension One Spas 01513-192 User Manual
Dimension One Spas Kitchen
Table of contents
Document Outline
- Spa Information
- Aquatic Fitness System Features
- Safety First
- Using Your Aquatic Fitness System
- Routine Equipment Maintenance
- Warranty Service Information
- Glossary of Terms
- Troubleshooting Guide
- Heating System
- Electrical System
- Water System
- Self-Diagnostic Control System
- AquaFit™, AquaFit™Dual Temp (Pool-Side), AquaPro™
- Cool condition:
- If the water temperature drops 20(F ((11(C) below the set temperature, the low speed pump and the heater will activate to bring the temperature within 15(F ((8(C) of the set temper
- Freeze condition:
- A potential freeze condition has been detected (55(F / (12.8(C.)
- No action is required.
- The low speed pump will be activated along with the heater. The spa will automatically heat, until the spa is out of danger (65(F / (18.3(C.)
- High temperature condition:
- Do not enter the spa water. The water temperature is above acceptable limits. Water temperature has reached 110(F ((43.3(C.) The air blower and low speed pump are activated to as
- High limit condition:
- No action is required.
- A potential freeze condition has been detected (55(F / (12.8(C.)
- Freeze condition:
- If the water temperature drops 20(F ((11(C) below the set temperature, the low speed pump and the heater will activate to bring the temperature within 15(F ((8(C) of the set temper
- Cool condition:
- AquaFit™Dual Temp (Spa-Side)
- AquaFit™, AquaFit™Dual Temp (Pool-Side), AquaPro™