Light button – Dimension One Spas 01513-192 User Manual
Page 27
Aquatic Fitness System
2005 Owner’s Manual
23
Light Button
Push the Light Button to control your Dynamic LED
lighting. The light hase three basic Color Effects you can
choose. Simply press the Light Button until you find the
one you want. The Color Effects are:
•
Color Fade Slow: This sequence rotates through
all colors approximately once per minute.
(Start
up default)
•
Color Hold: Hold on any of the colors.
•
Color Fade Fast: This sequence rotates through
all colors approximately three times per minute.
The default Color Effect is Color Fade Slow. Use the Light
Button to change Color Effects as follows:
•
Start on Color Fade Slow (default)
•
Turn off for 1 second, back on again for Color
Hold
•
Turn off for 1 second, back on again for Color
Fade Fast
•
Turn off for 1 second, back on again for Color
Hold
•
Turn off for 1 second, back on repeats to Color
Fade Slow
•
Turn off for 5 or longer: start on Color Fade Slow
When the Light Indicator Light, the Jets Indicator Light,
and the Heat Indicator Light are flashing, they indicate a
problem with your spa. See the
for more details.
For your convenience and cost savings, the light will automatically turn off after
one hour. To reactivate the light after the timer has shut off, simply press the
Light Button again. The light will always start in the Color Fade Slow sequence
after it hase been off for more than 5 seconds.