Beisler 1911-4 - Manual (Page 80)

Short Seam Automat 1911-4 / 1912-4 Working Instructions
- D 80 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.5 List of special parameters
No. Programmable special parameters in list (F3)
18
STITCH LENGTH SEAM BEG:
Stitch length at beginning of seam (Input 5.0 mm max.)
19
DISTANCE OF THIS ST.LEN:
Distance of stitch length at beginning of seam
20
1.ST.LENGTH OF CURVE:
First stitch length in curvature (Input 5.0 mm max.)
21
DIST.OF 1.STICH LENGTH:
Distance of first stitch length
22
2.ST.LENGTH OF CURVE:
Second stitch length in curvature (Input 5.0 mm max.)
23
DIST.OF 2.STITCH LENGTH:
Distance of second stitch length
24
ST.LENGTH OF MAIN SEAM:
Stitch length of main seam (Input 5.0 mm max.)
25
STITCH LENGTH SEAM END:
Stitch length at end of seam (Input 5.0 mm max.)
26
DIST.OF THIS ST.LENGTH:
Distance of stitch length at end of seam
27
ST.LENGTH TRIMM.STITCH:
Stitch length of cutting stitch (Input 5.0 mm max.)
28
CHOICE OF TRIMMING ST.:
Cutting stitch / Preselection
30
START MODUS ..........:
Start mode preselection
32
BLOWING MODUS ........:
Blowing, mode (00 switched off - 01 switched on)
33
PUSH RETAINER MODUS:
Holding stamp and ejector stamp, mode (00 switched off - 01 switched on)
34
SWING RETAINER MODUS:
Ejector stamp, mode (00 switched off - 01 switched on)