BECKHOFF AX5000 1,5 A - 40 A - Manual (Page 7)

BECKHOFF Drive Technology 1 Foreword
AX5000 Version : 4.6 7
3.0 Chapter-Update:
4.2.1; 4.4.2.2; 4.4.4; 4.8; 5.1.1.2; 5.2.1.1
New chapter:
1.8; 4.6; 4.7.9; 4.7.11; 7
2.5 Chapter-Update:
4.6.7; 6
2.4 Chapter-Update:
1.1; 1.2; 1.5; 4.5; 5.2
New chapter:
1.3; 1.4
2.3 Chapter-Update:
2.2; 5.2.3.1
New chapter:
6
2.2 Chapter-Update:
2.2; 3.1; 4.6.6; 4.6.8; 5.1.1; 5.2.1.5
2.1 Chapter-Update:
4.1; 4.6.6; 5.2.3
2.0 General revision on account of the UL-Listing of the AX5000.
1.3 Chapter-Update:
1.1; 4.4.2.1; 4.4.2.2; 4.4.3.1; 4.4.3.2; 5.2.1; 5.2.1.1
1.2 General routine corrections
1.1 First edition
1.0 only german
1.7 Appropriate use
The servo drives of the AX5000 series are exclusively designed for torque, speed and
position control of suitable asynchronous and synchronous three-phase current motors. The
maximum permissible effective motor voltage must be at least equal the effective mains
voltage fed into the servo drive.
The servo drives from the AX5000 series are designed for installation as components in
electrical systems or machines and may be operated only as integrated system or machine
components.
WARNING
Caution – Risk of injury!
Electronic equipment is not fail-safe. The machine manufacturer is
responsible for ensuring that the connected motors and the machine are
brought into a safe state in the event of a fault in the drive system.
The servo drives may only be operated in enclosed control cabinets and in accordance with
the conditions described in the "Technical data" section.