D-Link DRO-210i - Manual (Page 63)

Administration
Dlink DRO-210i User Guide 63
10 Administration
The router provides several administrative features/tools to maintain and monitor the
router. This section discusses these features and their configuration in detail.
10.1
Device Information
The current status of the router can be obtained through this page.
Select Status →
→ → → Device Info to view Device Information table as explained below.
Device Info
Device Name Displays the device name.
Firmware Version Displays the firmware version used by the router.
System Up Since Displays the duration for which the router has been running.
LAN
LAN Physical Link
Status Displays if a cable is plugged in (UP) or out (DOWN) on the LAN port.
MAC Address Displays the MAC address of the LAN port.
IP Address Displays the current LAN IP address.
Subnet Mask Displays the subnet mask for the LAN IP address.
DHCP Server Displays if the router is currently configured as a DHCP server.
WAN1
WAN1 Physical
Link Status Displays if a cable is plugged in (UP) or out (DOWN) on the WAN port.
WAN1 Protocol
Status Displays the operational status of the WAN protocol.
Connection Type Displays the WAN routing protocol selected (Static, Dynamic or PPPoE).
IP Address Displays the current WAN IP address.
Subnet Mask Displays the subnet mask for the WAN IP address.
Default Gateway Displays the gateway IP address for this interface.
WAN2
WAN2 Physical
Link Status Displays if a cable is plugged in (UP) or out (DOWN) on the WAN port.
WAN2 Protocol
Status Displays the operational status of the WAN protocol.
Web UI