D-Link DRO-210i - Manual (Page 41)

Firewall
Dlink DRO-210i User Guide 41
Blocked Services
Click on the link “Blocked Services” to get to Blocked Services configuration page.
This page allows administrator to specify the application to be blocked from Trusted
network to the UnTrusted network.
Outbound Policies (Service Blocked Rule)
Add Service Rules
Transport Type Select from the drop-down menu a transport type to be
blocked by the router.
Protocol Select from this drop-down menu the application. This is the
equivalent of entering the correct Transport Type and the port
number corresponding to a given application.
Port Range Enter the range of port numbers for which the current policy
rules will be applied. If you have only one port number to
enter, enter it in both fields.
Direction This is the direction (Outbound) of network traffic for which
the current policy entry will be applied.
After entering all the information press the Apply button and the Service Blocked Rule
table will now be displayed at the bottom of the page. Press Delete button for deleting the
corresponding entry.
IP Blocked Rules
In Service Blocked Rule table, click the icon under IP Blocked Rule column to
configure Blocked IP Rules.
Add Blocked IP Rule
Service Displays the Protocol and Port for which Blocked IP Rule is
being configured.
Source IP Select Any or IP Range. If IP Range is selected, the
administrator can specify a range of IP addresses that the IP
filter policy will be applied to. If you have only one IP address
that you want to filter, enter this address in both the From and
To fields.
Destination IP Select Any or IP Range. If IP Range is selected, the
administrator can specify a range of IP addresses that the IP
filter policy will be applied to. If you have only one IP address
that you want to filter, enter this address in both the From and
To fields.
Status Select Enable or Disable to activate or deactivate the
configured entry.
Web UI
Web UI