3 time – D-Link DRO-210i User Manual
Page 22
DHCP, DNS and Time
Dlink DRO-210i User Guide
22
3.3
Time
The system date and time of the router can be configured via this option. The system date
and time can be configured manually, or it can be obtained automatically from a global
time server using NTP.
NTP is designed to synchronize the time on a network of machines. NTP runs over the
User Datagram Protocol (UDP), using port 123 as both the source and destination port.
NTP Version 3 RFC 1305 is used to synchronize timekeeping among a set of distributed
time servers and clients.
An NTP network usually gets its time from an authoritative time source, such as a radio
clock or an atomic clock attached to a time server. NTP Protocol is then used to distribute
this time across the network. An NTP client makes a transaction with its server over its
polling interval (from 64 to 1024 seconds) which dynamically changes over time
depending on the network conditions between the NTP server and the client.
The list of public NTP servers is available at
.
Select Misc →
→
→
→
Time to configure System Time Settings as explained below.
System Time Settings
System Date Time
The current date and time at the router.
Time Zone
Select the appropriate time zone that can be used to set the system time.
Administrator can select any one of the time zone to which he belongs.
Time Set Type
Select either MANUAL or SNTP setting.
SNTP Settings
Set Type
Select either IP address or Domain Name to be used for SNTP Setting.
IP address
The IP address of the NTP Server.
Domain Name
The domain name of the NTP Server e.g. ntp1.dlink.com.
Manual Settings
YYYY-MM-DD
Manually set the current year, month and date.
HH-MM-SS
Manually set the hour, minute and seconds.
Web UI