Axel AX4000 User's Manual - Manual (Page 98)

Appendix
92
AXEL Office Server
A.9.1 - Standard Processing
The standard behaviour of these 8 leds is to record serial port activity (see
above). But for the two following event the led meanings are:
1 - No IP address is assigned to the Office Server
: The 8 leds remain lighted until an IP address is set.
2 - The Office Server Set-Up is used: the 2 leds corresponding to the admin.
Port remain lighted and flash to indicate the data traffic
A.9.2 - Specific Processing
: bootp stage (getting information for downloading)
: tftp stage
: Download performed (led lights for 1 second)
: RARP request (to get an IP address)
: BOOTP request (to get an IP address)
→ → → → →
: Downloading in progress
A.9.3 - Errors
Note: after an error occurs, the Office Server should be power-cycled.
a) Network errors
: Office Server Ethernet interface not responding
: Other network problems
b) Bootp protocol error
: No response to the bootp broadcast request (the
bootp host is unreachable or not correctly set-up)