Axel AX4000 User's Manual - Manual (Page 72)

Appendix
66
AXEL Office Server
Printers can be added using either of two methods:
- Standard Processing: AIX sends a raw file to the Office Server. Three
parameters are required:
- Name of Queue to Add: name of the printer accessed by the lp
command
- Destination Host for Remote Jobs: hostname of the Office
Server (refer to /etc/hosts)
- Name of Queue on Remote Printer: Queue Name associated
with the Office Server's port
- Local Filter: AIX passes the file to the printer through a formatting filter.
The first parameter required is the type of printer. Select this from the list
of supported printers. Three parameters are required:
- Name of Queue to Add: name of the printer accessed by the lp
command
- Destination Host for Remote Jobs: hostname of the Office
Server (refer to /etc/hosts)
- Name of Queue on Remote Printer: Queue Name associated
with the Office Server's port
Note: Use of the Local Filter method is strongly recommended.
c - Using lpd under SCO UNIX
Run scoadmin and select [Printer] →[Printer Manager]. Then select
[Printer] →[Add Remote...]→[UNIX]. A dialog box is displayed. Two
parameters are required:
- Host: hostname of the Office Server (refer to /etc/hosts)
- Printer: Queue Name associated with the Office Server's port
A.2.2 - Windows
To add a printer, select the 'Add printer' icon (in the 'Start'¤'Settings'¤'Printers'
menu).
Within the displayed dialog box, select 'Local printer' (Disable the Plug-And-
Play detection). Click on 'Next'.