Axel AX4000 User's Manual - Manual (Page 92)

Appendix
86
AXEL Office Server
#tcp_router7_target= (IP address format | default)
#tcp_router7_type= (net | host)
#tcp_router8_ip= (IP address format)
#tcp_router8_target= (IP address format | default)
#tcp_router8_type= (net | host)
Note: if a configuration file is obtained from an Office Server, undefined hosts
and routers are commented out.
Router explanation:
- default router: tcp_defrouter_ip is the default router IP address
- other routers: tcp_router%_ip is the router IP address,
tcp_router%_target is the destination IP address and
tcp_router%_type is the type of the destination (host or network).
Serial Port Parameters
In the following section of the file, for ease of reading, the serial port number
(from 1 to 4 or from 1 to 8) has been represented by the '%' character. In a real
configuration file, the parameters for each serial port would, of course, be listed.
ch%_service_mode=server (none | server | client)
ch%_service_type=telnet (tty | telnet | lpdrcmd)
ch%_service_qname=aux1 (character string, 8 char max.)
ch%_service_tcpport=2048 (numeric)
ch%_associate_host=vangogh
(character string, 15 char max.
or IP address format)
ch%_associate_term=ansi (character string, 15 char max.)
ch%_associate_idstring= (yes | no)
ch%_associate_autoconn=yes (yes | no)
ch%_associate_inactivity= (numeric from 0 to 99)
ch%_associate_befprint= (character string, 18 char max.)
ch%_associate_aftprint= (character string, 18 char max.)
ch%_associate_crnlconv= (yes | no)
ch%_associate_backup= (yes | no)
ch%_backup_host= (character string, 15 char max.
or IP address format)
ch%_backup_tcpport= (numeric)
ch%_backup_timeout=
(numeric from 0 to 99)